Veronte HIL Simulator

Veronte HIL Simulator

Price as configured: 1990 21% Excl. Tax:

  • Safe environment operation & testing
  • Training and development
  • Real actuator movement
  • Full Hardware in the Loop Simulation
  • Real autopilot hardware and software

View HIL Demo


Veronte Hardware In the Loop (HIL) Simulator package is a powerful tool for Veronte Autopilot integration, development and operator training; permitting to extensively operate the system in a safe environment, prior to conducting real flight operations.

HIL simulator module enables communications between Veronte Autopilot and Veronte HIL Simulator running on a PC. For the autopilot, it is as if it were flying, taking simulated data as real sensor input.

HIL Setup

Same hardware and software used to operate the real platform can be used for performing the hardware in loop simulation by using the HIL wiring. Operator will use Veronte Pipe interface in the same way it is used during a real flight.

Veronte HIL Simulator shares simulated sensor data with Veronte Autopilot and Veronte commands actuators in the simulator, GNC algorithms runs on the autopilot hardware as it does on a real flight.

Any Veronte Autopilot, with advanced communications module enabled, can be used with the simulator, avoiding extra hardware costs.

Real Actuator Movement

During the simulation, not only the actuators and control surfaces on the Veronte HIL Simulator 3D model will move, but also the ones on the real platform will.

Provided wiring permits to connect Veronte Autopilot to the PC running the flight simulator without disconnecting it from the aircraft. This advanced functionality is used to perform the simulation with real actuator movement on the ground, so the whole system can be tested for detecting both configuration and platform mounting failures.

Advanced Configuration

HIL simulation permits to test everything configured on the autopilot prior to performing real operations (payload activation, control adjustment, failsafe mitigations…). All of this, tested form Veronte Pipe, same software that is used for real aircraft operation.

This powerful simulation environment provides a real UAV flight feeling. All flight modes are available during the simulation: automatic, manual, arcade... so the operator will not even notice that the aircraft is on ground.

Veronte HIL Simulator also includes tools for simulating adverse flight conditions such as: rain, wind, adverse weather, system failures, motor stop, low fuel, cargo release… all of which are compatible with Veronte HIL Simulator.

Compatible with Any Platform

Veronte Autopilot is compatible with a wide range of platforms, permitting to operate almost any unmanned vehicle imaginable: fixed wing, helicopter, multirotor, surface vehicle, hybrid platforms, parafoil, blimp…

UAV Fixed Wing
Fixed Wing
UAV Multirotor
UAV Helicopter
UAV Hybrid
UAV Blimp
UAV Parafoil
UAV Missile
Ground Vehicle (UGV)
Ground Vehicle (UGV)
UAS Target
Surface Vehicle (USV)
Surface Vehicle (USV)

Plane Maker tool permits to configure unmanned aircraft vehicle layout and components (engine, fuel tanks, propeller…) so the simulation can be performed with real aircraft performance; being a cost-effective tool for testing new aircraft configurations prior to constructing the aircraft.

Professional HIL kit for X-Plane simulator   €1,990.00

Price as configured: 1990 21% Excl. Tax:

Pl Las Atalayas, C/ Chelín, 16, 03114
Alicante (España) | +34 965 115 421
[email protected]