- Lightweight and reduce size
- LFast reaction time
- Encoder support
- Configurable gains
The Veronte Motor Controller is a small brushless control device, particularly an ESC for critical actuator control that can be controlled through PWM, CAN or I2C interfaces. It is well used for brushless motor control including advanced features for precision applications. It can track angular position by a built-in control mechanism using encoder signal input for precise motor positioning.
Advanced precision control is of special interest for controlling pointing devices such as gimbals or tracking systems. Any brushless motor can be controlled precisely with this professional ESC, providing to the operation a new added value in a matter of accuracy. Gimbal control is enhanced due to its very fast response, the image is rapidly stabilized and pointed to the exact point the operator might be looking for.
On large distance pointing, precision is a must as the pointing error highly increases with distance. The use of precision encoders for motor control provides extraordinary precision, so it is a perfect solution for long range applications. It can significantly improve the performance of precision gimbals for its use in large aircraft and high-altitude systems.
CAN Bus control is available, at the time it can be controlled with a PWM or I2C input. It permits to stablish advanced motor controller layouts, being possible to install several brushless motor controllers on the same CAN Bus port.
PDI Control Algorithm
The control algorithm embedded in the system is Proportional Integral Derivative (PID), whose gains can be configurable by the user, so performance is optimized for every application. This PID control algorithm manages the motor position, which can be done in two different ways: taking the motor position as an absolute value in the reference system or taking the position relative to a IMU sensor.
Characteristics Power Inputs 2x (6-60vDC) Power to Motor Voltage: same as input. 3-phase brushless interface Maximum Input Curent 3A Typical Input Current 1.5A/td> Communications Buses 1x CAN & 1x I2C Input / Output 4x GPIO (on/off), 2x PWM / ECAP Supported Encoders SPI Differential, SPI, Digital (ECAP & EQUEP) Control Algorithm PID - Proportional Integral Derivative PID Gain Configurable Auxiliary Power Outputs 1x 5V DC, 1x 3.3V DC Embedded Sensors Input voltage & board temperature Dimensions 60x25x15mm Weight 10g Redundant Isolated CAN Expansion 2x CAN for critical actuators - two wire each, no power wires required (Opcional) Control Bidirectional speed or position control