Embention  / NM& - UAS / RPAS Solutions  / TS150 Tethered Station

TS150 Tethered Station

TS150 Tethered Station
TS150 Tethered Station
    • Unlimited flight duration
    • Up to 150m high
    • Autonomous cable winder
    • 1x 230VAC (110VAC Optional)
    • Gimbal Camera EO/IR 4k HD.
  • Description
  • Specification
  • Pricing
Description

NM&TS150 Tethered Station

The NM& TS150 Tether Station permits to power the UAV directly form an on-ground power source, providing unlimited flight time. Tether Station uses an innovative ultralight cable to connect the NM&TS150 to the base station on the ground so the drone has access to a continuous power source during the operation.

Increased safety & Better Performance

Up To 150m High
Up To 150m High
Thanks to the innovative ultra-thin cable included it is possible to fly tethered NMTS150 up to 150m (500ft) high.
Unlimited Flight Time
Unlimited Flight Time
Tether cable provides continuous power to the drone so it can stay in the air permanently with no endurance limitations.
Custom Power Source
Custom Power Source
Powered from Vehicle power source for the electrical grid (230V AC), for installation on permanent stations.
Self Cable Winder
Self Cable Winder
Autonomous system controlled by Veronte Autopilot controls cable release and collection avoiding tangles and cable breaks.
Secure Communications
Secure Communications
Cable data transmission enables safe data communications avoiding jamming attacks and data piracy & capture at the time it avoids drone location.
Video & Data Transmission
HD Video & Data Transmission
High bandwidth Ethernet connection for video and data transmission through cable, enabling a two way communications channel.
Wifi Connection
Wifi Connection
Embedded WIFI module provides system status information and permits to monitor and control the drone from any PC or Tablet.
Any Multirotor
NM&TS150 Integration
Integrated with the NM&TS150 equipped with Veronte Autopilot, we have an advanzed monitoring station.

Embedded Veronte Autopilot Technology

Tether Station for NM&TS150 drone includes Veronte Autopilot technology providing advanced system control. Apart from tether release system control, embedded Veronte autopilot monitors embedded sensors (current, temperature, power input…) predicting and detecting system failures and commanding safety procedure activation. By combining it with a Veronte Autopilot powered NM&TS150 drone is possible to install it in moving platforms. Tether station shares its position with the drone. In this way, the drone will move with the base station. This functionality enables tether installation on moving platforms: cars, boats… to be used as a surveillance system, for lightening...

Safer than Drone Systems

Being a leash system, it is more secure than drones. Once defined a safety area with a radius equal to the maximum height configured, and thanks to fibre reinforced cable, it is possible to guarantee that there will be no material or personal damages in the event of an accident. Veronte Autopilot technology together with sensors on the tether station provides advanced system safety. During the operation, the system is continuously self-checking system status. Once a failure or a deviation is detected it automatically displays an alert to the operator in charge of monitoring and performs a fail-safe procedure. It is possible to customize fail-safe routines based on data from the onboard Veronte Autopilot unit or from ground side sensors. Being possible to configure the action to be performed depending on the severity of the failure detected.

Custom Payloads

Tether Station is independent on the installed payload. In this way it can be used with a wide range of payloads for various applications: cameras, lights, sensors, … Payload can be powered from the ground power system by using same tether cable used for drone power. It makes possible to customize payload bay and use different payloads that may not be suitable for a standard drone due to high power consumption.

Civil & Military Applications

Surveillance Surveillance
EO / thermal camera installation makes possible to use it for surveillance purposes with real time HD video broadcast
Advanced Monitoring Station Advanced Monitoring Station
Installed on a car or a research vehicle it is possible to raise a camera for increasingrange of view in military operations.
Convoy Sky-Eye Convoy Sky-Eye
Installing a sky eye system on military convoys permits early risk detection and ambush avoidance.
Impact Control Impact Control
Onboard cameras permit to monitor impact location for artillery shoots and introduce shooting corrections in the system.
Anti-Drone System Anti-Drone System
In use with drone detectors or jamming systems makes possible to detect and bring down drones trying to fly in restricted areas.
Traffic Monitoring Traffic Monitoring
Thanks to the installation of cameras or radar systems, it is possible to have a high observation spot for traffic control.
Specification

Base Station
Size 650x650x630mm
Weight 53kg
Cable Size 150m
Cable Weight 3kg for 150m
 Power Input AC 1x 230V
Power Input AC (Optional) 110V
Advanced Control RTK, installed over vehicles, boats...
Cable Data Transmission 100Mbps
Onboard Features
Size 1342x1422x358mm
Weight 11,7 kg payload included (Camera Gimbal).
Power Output Voltage 24V <> 6S
Endurance Unlimited 24/7
Maintenance Each 1000h
RGB / Visible Camera 70,7º HFOV, 65º FOV, 4K, 3840x2160p, 30FPS, 20x zoom (12x Optical)
IR / Thermal Camera 18º horizontal field of view, 640x480p, 12µm, NEdT
Gimbal Control 3 axis – precision encoders
Artificial VIsion Target tracking, geo-tagging, geo-location, moving object detection …
Safety Onboard backup battery; short circuit, power, current & overheat sensors

Pricing
REQUEST A QUOTE

I accept the LOPD*
* Required